Auto Blogs | Car Forums

What you have to do first is make sure that you have power at the red wire that goes to your coil pack connector.that should be pin #4.if you dont have power then check your fuses at the fuse box behind the radiator.Fuse #102 30amp.Or you can check fuse #225 2amp under the left side of the dash.Hope this helps. 

Please give year make and model so I can more affectively help you! 

Start by cheking all your fuses.THe owners manual willhelp you locate the fuse box and tell you what they feed.

Well first of all I need toknow the year make and model of the vehicle please.

Of course there is such animal.You can go to any autozone and they will do that for free.The airbag light will only go off when you correct the problem that  it currently has.What color is your break light? What does it say? Does it say ABS and amber in color or does it display brake and red in color.Make sure you check your break fluid.You ...

 

You can testinjectors but that requires sophisticated equipment.Get some brake cleaner and spray it around the engine whare there are vaccum lines and the lowerintake if the engine changes speed then you do have a vaccum leak.And yes a vaccum leak will give you such codes.do this for nowand repost.

Get a test light and remove the connector at the ignition control module with the pink and black wires.place the key on with the engine off and take one end to a good ground maybe the battery neg. post. and the other end take it to the connector pink wire terminal.The test light should turn on.Now take the end that was grounded and place it in on ...