Auto Blogs | Car Forums

I need to replace resistor on blower motor, because Fan speed works only on 1-4-5 speed. It does not work on 2-3.I have looked under the dash on both sides and cannot locate, do I need to remove blower motor to locate.

Need Help thejoe

keywords: buick rendezvous, new buick's, buick lineup

no you do not need to remove the blower the resistor is at the other end of the wires going to the bloer motor. unplug the motor and then follow the wires(approx 6 in) and you will find the resistor there will be two 5.5 mm screws holding it in remove them and pull the resistor out then reverse procedure to reinstall the resistor. hope this helps

keywords: buick rendezvous, new buick's, buick lineup