 | | BMW SCANNER 2.01 | | BMW Scanner E6x (version 2.0.1) for chassis E60/E61(5') E63/E64(6') E65/E66(7') E87(1') E90/E91(3') |  |
|
|
 | | BMW CAN PROGRAMMER | | BMW CAN Programmer is used for modifying auto cluster odemeter data and programmering the anti-theft data via CAN communicate interface applying communicate agreement. | |
|
|
 | | Mercedes Benz Carsoft 7.4 | | MCU controlled Interface for Mercedes Benz Carsoft 7.4 which is compatible with the original interface. | |
|
|
 | | BMW INPA V502 | | Support of all ECU use cases in Engineering, Test, Production and After Sales • Specification of ECU's diagnostic data • Reading and clearing error memory • FLASH data uploading and downloading • Reading measurement value | |
|
|
 | | BMW CAS3 PROGRAMMER | | Mileage correction for BMW CAS / MB EZS / DASHBOARDS / MODULES / with 912 / 9s12 / 9s12x MCU, in circuit programming ( no need removing mcu ), can read / edit / write eeprom of MCU, mileage calculation integrated in soft. | |
|
|
 | | BMW Super Scanner V2.0 | | BMW DASH E6x V2.0 is intended to work with BMW 1, 3, 5, 6 and 7 series in "new" chassis. for chassis E60/E61(5') E63/E64(6') E65/E66(7') E87(1') E90/E91(3') | |
|
|
 | | OP-COM ( V2008 ) | | OP-COM - PC based Opel diagnostic program It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test, and supports remote, and key programming. | |
|
|
 | | BMW Scanner 1.4.0 | | Determination of chassis, model, engine, gearbox and complete set Searching of all units and reading: - identification data - odometer value - VIN and ADFG - programming info (UIF) | |
|
|
|
 | | NISSAN CONSULT INTERFACE | | Interface fitting for 14pin Consult Port of Nissan vehicles. - Heavy & robust casing for rough service use - Connects to PC via RS232 - Powered from car battery over 14pin Consult Port of Nissan vehicles. - LED to control power and clock function | |
|
|
 | | OPEL Tech2 COM | | Functions This item can perform diagnosis of Engine, Transmission, Chassis, and Body systems for OPEL vehicles from year 1997 to 2004 | |
|
|
 | | OPEL Tech2 USB | | Functions This item can perform diagnosis of Engine, Transmission, Chassis, and Body systems for OPEL vehicles from year 1997 to 2004. | |
|
|
 | | Opel-Scan | | Opel Scanner works with Version 1.0.1.7 (Advanced) The AutoScannerOpel program is designed for OPEL cars diagnostics. The program supports majority of electronic control units (ECU), installed on Opel cars from 1987-2007 years. | |
|
|
 | | BMW INPA OBD2 INTERFACE | | Specification of ECU’s diagnostic data * Communication development * Reading and clearing error memory * Flash data uploading and downloading * Reading measurement values * Input/output control | |
|
|
 | | Ediabas OBD2 Interface | | OBD2 Interface for BMW Ediabas / INPA Software 100% compatible with the original BMW Interface and all it's functions - Connects to RS232 | |
|
|