Auto Blogs | Car Forums

1. Last year when the auto mechanics were changing the battery they stated the alarm went off....I didn't know I had an alarm.

2. 6 months ago My car wouldn't start, the hazard lights were not on but you could hear the clicking sound that the hazards usually signal.  I was told I should have the keyless entry disabled.

3. We disconnected all of the wires connected  to the keyless system....but now my radio and clock won't work.

Is there a fuse somewhere in the vehicle? Or is it that we just disconnected all the wires tied into the keyless remote device. (Located under the dash.)

If you need to know the device name it is the Pursuit Keyless Entry System.

Thanks for your time!

keywords: buick lesabre, buick lineup, lesabre,  

There are 2 fuses that give power to this radio. #1 and #2 is in the fuse box on the side  of the instrumrnt panel. They are both a 10 amp fuse.

keywords: buick lesabre, buick lineup, lesabre, 

I have a 1994 Buick Regal and need to program the keyless remote, but can't locate the keyless entry connector.  Do you know where the keyless entry connector is located on your LeSabre?  Mine should be in the same location.

Thanks! 

keywords: buick regal, buick lineup, buick cars, 

Most  car remotes  can be programmed manually at home without any tools or technical skills.

If you need to just order the  [ remote programming instructions  please check our website at

http://www.carandtruckremotes.com/programming-instructions.html

If you have any more questions or have any specific inquiries about programming your vehicle please contact us at customercare@carandtruckremotes.com including year, make and model of your vehicle.

You can also view our FAQ page for answers to common questions. Link below

http://www.carandtruckremotes.com/faq.html

Best Regards

Customer Care

http://www.carandtruckremotes.com

http://www.newkeylessremotes.com

http://www.keylessentrystore.com