I have the exact same car and just did mine myself. It is pretty easy. Start by removing the corner or turn signal lens by sticking a flat head screw driver down the release slot and pushing forward. This will make a lot more sense when you look at it. there is a slot under the hood right on top of where the lens is stick it straight down and push the lens towrd you it should just pop out.
With that out it is pretty self explanatory. You just remove all the screws and the thin molding around the light. Pull old assembly out, put the new one in- replace screws.
It took me about an hour because I couldn't find a hidden screw- its kind of up underneath so look carefully you'll find it.
Good luck.