I will try to give you the help you might be looking for since I just removed my Door panel. The first thing I did was
to move the car out of the garage into an area where there is plenty of light. 2., Get a couple of long bladed common
screwdrivers.
3. Starting at the bottom of the door panel, slid the
screwdriver under the bottom edge of the panel and pull outward.
i
f you hear a pop then you are doing good. Continue around the
panel along the bottom first and then up the sides. 4. When
you
get the panel loose pull the top portion toward you and look behind the
panel. In there you will see a metal clip that holds the panel
in
the correct position while reinstalling the panel. Pull downward
and the clip should come loose. 5. slide the door panel forward
while holding the
door handle outward and remove the
panel. 6. Remove the black covering from the metal
backing. This will expose all the mechanisum
to work on yhe window motor or raising and lowering mechanisum. Hope this helps.
Glyn J.
keywords: buick rendezvous, new buick's, buick lineup